Router IP
192.168.3.1 Login for Huawei Home Routers
Not working? Check the label on the back or bottom of your router.
192.168.3.1 is the web management address of most Huawei home routers, such as the WiFi AX2 and AX3 families and similar mesh units. To sign in, connect to the router's WiFi or a LAN port, enter http://192.168.3.1 in your browser and type the login password you created during first setup. Huawei does not ship these routers with a shared default password: a factory-fresh unit opens a setup wizard instead, and some models print a management password on the nameplate.
This guide explains each case, plus the one setting that makes 192.168.3.1 disappear completely.
Default usernames and passwords
| Brand / model | Username | Password |
|---|---|---|
| Huawei home routers (new or reset) | None | No default; you create it in the setup wizard |
| Huawei routers set up via WPS / some models | None | Management password on the nameplate |
How to log in
- Connect your phone or computer to the router's WiFi, or plug a cable into any port (many Huawei routers detect WAN and LAN automatically).
- Open a browser and go to http://192.168.3.1. On a phone, switch to the desktop view if the page looks cut off.
- On a new or reset router, tap Let's Start and follow the wizard: choose how you connect to the internet, then set your WiFi name and password.
- When the wizard offers it, either reuse the WiFi password as the login password or set a separate one.
- On later visits, enter that login password and click Log In.
- If the router has a management password printed on its nameplate, use that one the first time.
Change the default admin password as soon as you're in.
What is 192.168.3.1 on a Huawei router?
It is the router's own address on your home network, the place where its configuration pages live. Huawei uses the 192.168.3.x range for its home routers, while its 4G/5G CPE boxes and Mobile WiFi hotspots normally use 192.168.8.1 and its fiber ONTs often sit on 192.168.100.1. The exact address is printed on the nameplate on the bottom of the router.
One caution from Huawei's own support notes: units customised for a mobile operator or ISP can use a different address. If yours came from a provider, trust the nameplate and your gateway reading over any guide.
Who uses it
Huawei sells these routers in shops and through operators in many regions. Lookups for 192.168.3.1 are especially frequent in Oman, Tanzania, Uganda and Chile, where Huawei home routers are a common choice. You will also see it in two-router setups, where a Huawei router sits behind an ISP fiber box or a 4G modem.
The address that vanishes: mesh and bridge mode
If you plug a Huawei router into another Huawei device that supports HarmonyOS Mesh+, the two may pair automatically. The router then copies the main device's WiFi name and switches to bridge mode, and 192.168.3.1 stops responding. Your phone shows only one network, which is by design.
To get a separate network and the 192.168.3.1 page back:
- Unplug the cable between the router's WAN port and the upstream device.
- Factory reset the router.
- Connect to its default WiFi, open 192.168.3.1 and run the wizard without the cable.
- Log in, go to More Functions > Network Settings > Link+ Settings and turn Link+ off.
- Reconnect the WAN cable.
Check your gateway address
- Windows: run
ipconfigin Command Prompt; read Default Gateway. - Android: WiFi settings > tap the connected network > Gateway (sometimes under Advanced).
- iPhone: Settings > Wi-Fi > (i) > Router.
- Mac: System Settings > Network > Wi-Fi > Details > TCP/IP.
Behind another router, a second Huawei unit may move to a neighbouring range such as 192.168.4.1 to avoid a clash. Whatever the gateway line shows is the address to open.
Still cannot reach the page?
- Confirm you are on the Huawei router's WiFi or a LAN port, not the upstream modem.
- Set your computer to obtain an IP address automatically. If you use a static address, it must be in the same range, for example 192.168.3.2 to 192.168.3.254.
- Turn off any VPN or proxy in the browser or system settings.
- Restart the router and wait two minutes.
- As a last resort, factory reset (hold the RESET button until the indicator changes) and set it up again.
Change the WiFi name, WiFi password or login password
WiFi: log in, open the WiFi settings page (named My WiFi or WiFi Settings depending on firmware), edit the name and password, and save. Devices reconnect with the new key. Huawei's AI Life app offers the same options if you prefer your phone.
Login password: go to More Functions > System Settings > Change Login Password, enter the current password, then the new one twice. Keep it different from the WiFi key so guests who know the WiFi cannot change your settings.
Security checklist
- Use WPA2 or WPA3 encryption; avoid open or WEP networks.
- Apply firmware updates when the router or app offers them.
- Turn off WPS if you never use the button.
- Turn on the guest network for visitors and smart-home gadgets.
Typed it wrong?
A missing dot or a letter instead of a digit, as in 192.168.3.l or 192.168.31, sends you nowhere. Drop it into the IP Typo Fixer for the corrected address.
192.168.3.l → 192.168.3.1 192.168.31 → 192.168.3.1 192.l68.3.1 → 192.168.3.1 192,168,3,1 → 192.168.3.1 192.168.3.1.1 → 192.168.3.1
Used by
- Huawei home routers · OM
- Huawei home routers · TZ
- Huawei home routers · UG
- Huawei home routers · CL
Frequently asked questions
What is the default password for 192.168.3.1?
There is no universal one. You set the login password in the setup wizard; some models instead print a management password on the nameplate.
Is the login password the same as my WiFi password?
Only if you chose that during setup. Many people tick the option to reuse the WiFi password, so try it first if you never set a separate one.
Why did 192.168.3.1 stop working after I connected a second router?
The router has probably joined a mesh in bridge mode. Follow the mesh steps above, or check the gateway address on your device to find the router now in charge.
My Huawei device uses 192.168.8.1. Which guide do I need?
4G/5G CPE boxes and pocket hotspots usually use 192.168.8.1. See our 192.168.8.1 guide.
Can I manage the router from my phone?
Yes. Open 192.168.3.1 in your phone's browser (desktop view helps), or use Huawei's AI Life app.
Does a reset delete my internet settings?
Yes. A factory reset erases the WiFi name, passwords and any PPPoE account details, so keep your provider's login information handy.