Router IP
192.168.8.1 Login for 4G/5G and Mobile WiFi Routers
Not working? Check the label on the back or bottom of your router.
192.168.8.1 is the dashboard of a SIM-card router. Huawei uses it on its Mobile WiFi pocket devices and its 4G/5G home routers (CPEs), which carriers such as STC and Zain in Saudi Arabia, Dialog in Sri Lanka and Zong in Pakistan supply under their own branding. Through the 192.168.8.1 login you can change the WiFi password, check signal strength and data usage, read SMS sent to the SIM and fix APN settings. This guide covers the steps, the default password rules and the problems that only cellular routers have.
Default usernames and passwords
| Brand / model | Username | Password |
|---|---|---|
| Older Huawei Mobile WiFi (e.g. E5573) | admin | admin |
| Newer Huawei 4G/5G CPE and pocket WiFi | See the nameplate | On the nameplate, or the one you set at first login |
| Carrier-branded units (STC, Zain, Zong, Dialog) | See the device label | On the device label (carrier versions can differ) |
How to log in
- Power on the device and wait until the signal indicator settles; a pocket unit can take up to a minute after a cold start.
- Join its WiFi using the network name and key printed under the battery cover, on the base, or on the card in the box.
- Open any browser and go to 192.168.8.1.
- Enter the login password from the nameplate (older pocket units: admin / admin).
- If the device asks, create a new login password and confirm your WiFi settings.
- Use the home screen to check signal, data used and new SMS messages.
Change the default admin password as soon as you're in.
What is 192.168.8.1?
192.168.8.1 is a private address that Huawei assigns to its mobile broadband devices. The router keeps .1 for itself, gives your phone and laptop other 192.168.8.x addresses, and shares the SIM's cellular connection with all of them. Because the dashboard is stored on the device, it opens even when your data bundle has run out, which is exactly when you need to check the usage counter.
Carriers and countries that ship 192.168.8.1 devices
- Saudi Arabia: STC and Zain 4G and 5G home routers. See the STC and Zain guides or the Saudi Arabia hub.
- Pakistan: Zong 4G devices.
- Philippines: pocket WiFi and LTE modems from Globe and Smart (pocket WiFi guide).
- Indonesia: MiFi and 4G modems, including Huawei-made Telkomsel Orbit units.
- Sri Lanka, Yemen, Jordan, the UAE, Kazakhstan and South Africa: Huawei LTE routers and pocket WiFi sold by local carriers, including Dialog in Sri Lanka.
What a SIM router dashboard can do
Compared with a fibre router, the 192.168.8.1 dashboard has a few extra tools. Carrier firmware may hide some of them.
- Signal details: bars plus technical values such as RSRP and SINR.
- Statistics: data used this month, with an optional monthly limit and alert.
- SMS: an inbox for messages sent to the SIM, often balance or bundle notices from your carrier.
- PIN management: enter or disable the SIM PIN.
- Mobile network settings: APN profile and preferred mode (auto, 4G only, 5G preferred).
Reading the signal numbers
RSRP measures signal strength. As a rough guide, anything better than -90 dBm is good, -90 to -105 is fair and below -110 is weak. SINR measures signal quality: above 13 dB is good, and below 0 means heavy interference. Move the router while the page refreshes; a window on a higher floor, away from metal and thick concrete, often adds several dB.
Finding the gateway on a phone or laptop
When a pocket WiFi is your only connection, your phone's WiFi details are the easiest place to check. iPhone shows it as Router after tapping (i) next to the network; Android lists it as Gateway in the network details. On Windows, Settings, Network & internet, Advanced network settings, then Hardware and connection properties shows the Default gateway. If it reads 192.168.1.1 or 192.168.0.1, your device uses a different chipset or brand; try that address instead.
192.168.8.1 login problems on 4G/5G devices
The page won't open
Phones abandon a WiFi network that has no internet. If your data bundle is finished, Android's adaptive connectivity or iPhone's Wi-Fi Assist may push the browser onto mobile data. Turn mobile data off while you use the dashboard.
The pocket WiFi went to sleep
Battery-powered units switch off their WiFi after a period with no connected devices. Press the power button once to wake it, then reconnect.
The password is rejected
Check the nameplate and remember that passwords are case-sensitive. As a last resort, the reset pinhole (often beside the SIM slot or under the battery cover) restores factory settings, including the original WiFi key.
"PIN required" or "PUK locked"
Enter the SIM PIN your carrier gave you. If the SIM asks for a PUK, get it from your carrier and don't guess: too many wrong PUK entries permanently block the SIM.
Connected but no internet
Check your data balance in the SMS inbox, then confirm the APN under Mobile network settings matches what your carrier publishes.
Change the WiFi name and password
Older Huawei screens keep this under Settings, then WLAN, then WLAN Basic Settings; newer ones have a Wi-Fi Settings tile on the home page. Change the SSID, pick WPA2-PSK (or WPA2/WPA3 on 5G CPEs), enter a strong key and save. Every device drops off and must rejoin. Huawei's AI Life app can manage many of these routers from a phone if you prefer an app.
Security for cellular routers
- Replace the login password; the dashboard can read your SMS, which may include one-time codes.
- Don't post photos of the nameplate online; it shows the WiFi key and login.
- Disable WPS and keep the firmware current through the device's update menu.
- Set a monthly data limit so a stranger on your WiFi can't burn through your bundle unnoticed.
Typed 192.168.8.l?
Small slips stop the dashboard loading: 192.168.8.l with a letter l, 192.168.81 with a dot missing, or 192.168.1.8 with the numbers swapped. Our IP Typo Fixer catches all three and links to the real dashboard.
192.168.8.l → 192.168.8.1 192.168.81 → 192.168.8.1 192.168.1.8 → 192.168.8.1 192.168.8.1.1 → 192.168.8.1 192.168.b.1 → 192.168.8.1 192,168,8,1 → 192.168.8.1
Used by
STC (4G/5G CPE) · Saudi Arabia- Zain (4G/5G CPE) · Saudi Arabia
Zong 4G · Pakistan
Globe / Smart pocket WiFi · Philippines
MiFi / Telkomsel Orbit (Huawei units) · Indonesia
Dialog · LK- Huawei LTE routers · YE
- Huawei LTE routers · JO
Huawei LTE routers · AE- Huawei LTE routers · KZ
Huawei LTE routers · ZA
Frequently asked questions
What is the default password for 192.168.8.1?
Older Huawei Mobile WiFi models used admin for both username and password. Newer models and carrier versions print the password on the nameplate or ask you to create one on first login.
Does 192.168.8.1 work without a data balance?
Yes. The page is stored on the router, so you can open it, read your carrier's SMS and check usage even with zero balance, as long as you stay on its WiFi.
How do I change my STC or Zain router's WiFi password?
Why does my 5G router keep showing 4G?
5G coverage may be weak where the router sits, or the network mode is set to 4G. Check the preferred mode in Mobile network settings and try a spot nearer a window.
Can I check which devices are using my pocket WiFi?
Yes. The dashboard lists connected devices with their names. Some models let you block a device from the same screen.
Is 192.168.8.1 the same on every Huawei router?
On most Huawei mobile broadband devices, yes. Huawei notes that carrier-customised versions can use a different address or password, so the nameplate always wins.