LoginMyRouter Find My Router
Menu

भारत · Provider

BSNL Router Login for Bharat Fiber and Broadband

Updated By LoginMyRouter Team

192.168.1.1
Open login page
Login URL
http://192.168.1.1
Default username
admin or user, depending on the ONT brand (see the sticker)
Default password
Printed on the ONT sticker, or given by your BSNL / Bharat Fiber partner
Other possible IPs
192.168.100.1

BSNL router login is a little different from other Indian ISPs because BSNL Bharat Fiber connections use fibre boxes (ONTs) from several manufacturers, often supplied by the local partner who installed your line. The good news: almost all of them open at http://192.168.1.1. Connect to your BSNL WiFi, type that address, and sign in with the username and password printed on the sticker of your ONT. A BSNL FTTH user manual published for subscribers uses exactly this address and walks through the WLAN menu shown below.

Here is how to log in, change the WiFi password, check who is connected and reset the box without losing your connection for days.

BSNL Bharat Fiber router login at 192.168.1.1

How to log in

  1. Connect your phone or laptop to the BSNL WiFi, or use a LAN cable from the ONT. Switch off mobile data.
  2. Open a browser and type http://192.168.1.1 in the address bar.
  3. Read the sticker under or behind the ONT for the username and password. Depending on the brand it may say admin or user.
  4. Enter those details and click Login.
  5. If 192.168.1.1 does not load, your ONT may use another address such as 192.168.100.1. Check the sticker or your device's gateway address.

Not working? Check the label on the back or bottom of your router.

How to change the WiFi password

  1. Log in to the ONT at 192.168.1.1.
  2. Open the WLAN or Wireless section. On many BSNL ONTs it sits under Internet > WLAN or Network > WLAN.
  3. Go to Security or Advanced and find the field called Pre-Shared Key, WPA Passphrase or Password.
  4. Choose WPA2-PSK, type the new password (at least 8 characters) and click Save/Apply.
  5. Reconnect all devices with the new password.
How to change the BSNL Bharat Fiber WiFi password

Change the default admin password as soon as you're in.

Why BSNL router login details differ from house to house

BSNL sells Bharat Fiber nationwide, but the ONT in your home depends on your circle and the local partner who laid the cable. That is why one neighbour logs in as admin while another uses user. The address stays mostly the same, so start with the 192.168.1.1 login page. Fibre boxes that use 192.168.100.1 are covered in our 192.168.100.1 guide.

The sticker is your source of truth. It normally lists the model, the default WiFi name, the WiFi key and the web login. Take a photo of it before mounting the box on a wall.

Older BSNL copper broadband modems

If you still have a BSNL ADSL modem on a telephone line, the login works the same way: 192.168.1.1 in the browser and the details from the modem label. The WiFi settings usually sit under Wireless or WLAN, and the internet username and password in the WAN or PPPoE section are your BSNL account details. Do not change those unless BSNL asks you to; a typing mistake there takes the whole connection down.

Check devices connected to your BSNL WiFi

Look for a status page called Device Info, LAN Status, WLAN Station or DHCP Clients. It lists each connected device with its MAC address and local IP. If you see more entries than you own, change the WiFi password at once and keep WPS switched off.

Reset a BSNL ONT safely

A restart (power off 30 seconds, power on) fixes most slowdowns. A factory reset, done by holding the reset pin-hole for about 10 seconds, is different: it can erase the internet (PPPoE or VLAN) settings your partner configured, leaving the LOS or internet light off until someone sets it up again. Before resetting, note the internet settings if you can see them, or call your partner first and ask whether they can reconfigure it remotely.

Contacting BSNL

For line faults, slow speed or a lost login, book a complaint through the BSNL Selfcare app or the official bsnl.co.in website. Many Bharat Fiber users get quicker help from the local partner whose details are on the installation receipt.

Safety tips for BSNL users

  • Change the default web login password after your first BSNL router login, if your ONT allows it.
  • Use WPA2-PSK with AES and a password of 12 or more characters.
  • Turn off WPS and remote management unless you need them.
  • Do not share the ONT admin password with anyone except your installer.

Typed 192.168.l.l, 192.168.1.l or 192.168.1.1.1 by mistake? The IP Typo Fixer sorts it out. Other providers are on our India hub.

Frequently asked questions

What is the BSNL router login IP?

Most BSNL Bharat Fiber ONTs and old BSNL modems use 192.168.1.1. Some fibre boxes use 192.168.100.1; the sticker confirms which one you have.

What is the BSNL ONT username and password?

It depends on the manufacturer. Many use admin, some use user, and the password is on the sticker. If your installer changed it, ask your Bharat Fiber partner.

How do I change my BSNL WiFi password?

Log in at 192.168.1.1, open WLAN (or Wireless), go to Security or Advanced, enter the new Pre-Shared Key and click Save/Apply.

My internet stopped after a reset. What now?

The reset probably cleared the PPPoE or VLAN settings. Contact your Bharat Fiber partner or book a complaint in the BSNL Selfcare app so they can reconfigure the ONT.

Can I change the BSNL WiFi password from the Selfcare app?

The Selfcare app is mainly for bills, plans and complaints. The dependable way to change WiFi settings on any ONT brand is its own web page at 192.168.1.1.

Is it safe to share my BSNL WiFi password with guests?

Share it only with people you trust, and change it after events or when tenants leave. If your ONT supports a guest network, use that instead.

Internet providers · भारत